A 510 cartridge looks simple to package: it is small, standardized at the thread and usually ships in a tube or a small box. In practice, vape packaging trips up a lot of launches because the cartridge dimensions vary more than people expect, the label requirements for cannabis extracts are long, and the package has to be child resistant on its own. This checklist covers the decisions in the order a buyer should make them.
Step 1: Measure the actual cartridge
“510” only describes the thread. Overall length, mouthpiece shape, tank diameter and the widest point of the cartridge all vary between hardware suppliers, and some cartridges ship with a protective cap or tip that adds length. Before you request packaging quotes, collect:
- Overall length including any mouthpiece cap
- Widest diameter (often the mouthpiece, not the tank)
- Fill volume options you plan to sell
- Whether the cartridge ships with an additional insert, tray or sleeve
The best practice is to send physical samples of each hardware option you might use. A tube or insert that fits one cartridge can rattle or jam with another.
Step 2: Decide what the immediate container is
The immediate container is the package in direct contact with the cartridge. Under the Cannabis Regulations that container must be child resistant and must have a security feature that shows it has not been opened before purchase. It also has to be opaque or translucent, because vape cartridges contain a cannabis extract rather than dried cannabis.
Common approaches are:
- A child-resistant tube sized to the cartridge, with a tamper-evident seal or label. Tubes are efficient to fill and protect the cartridge from breakage.
- A child-resistant container or carton with an insert, used where a brand wants a box-style format.
- A CR immediate container inside an outer sleeve or carton. The outer layer is optional, but if used it must also follow the plain-packaging rules and carry the required label information.
Compare formats on our CR tubes and child resistant tube pages.
Step 3: Check the extract-specific rules
Vape cartridges fall into the cannabis extract class, which adds rules beyond the general packaging requirements. According to Health Canada’s packaging and labelling guide:
- The immediate container of a cannabis extract cannot contain more than 1,000 mg of THC, taking into account the potential conversion of THCA.
- A liquid extract container cannot hold more than 90 mL, and must not allow the extract to be easily poured or drunk.
- The label, package and any brand element must not indicate or illustrate a flavour other than cannabis that falls into categories such as confectionery, dessert, soft drink or energy drink.
- Extract labels need a list of ingredients and any food allergens present, as well as the identity of the product and its intended use (for example, for inhalation).
Because THC content for inhaled extracts is displayed as a concentration, confirm with your quality team which values will go on the label before artwork is built.
Step 4: Plan the label before choosing a tube length
A cartridge tube has a small display surface. The principal display panel still needs the standardized cannabis symbol (minimum 1.27 cm square, upper-left quarter of the panel), the yellow health warning box, the brand name and the THC and CBD content. Other required items include licence holder contact information, class of cannabis, lot number, packaging date, net weight, storage conditions, ingredients, intended use and the child warning statement, all in English and French.
Many vape brands solve this with a peel-back or accordion label, which the Regulations permit on immediate containers when the panel is resealable and stays attached. Even then, the health warning, cannabis symbol, brand name, lot number, THC/CBD content, intended use and a few other items must remain on the outside surface. Mock the label up at actual size on the tube you are considering; if it does not fit, step up a size or change format.
Step 5: Plain packaging on tubes and cartons
The same plain-packaging rules that apply to pouches apply to vape packaging. The container must be one uniform colour inside and out; a cap may be a different colour from the body. No metallic or fluorescent colours, no images, no embossing or raised features, and only the brand name plus one additional brand element on the label. Up to two black-and-white bar codes, including QR codes, may appear on the container.
Step 6: Multi-packs
If you plan to sell two or more cartridges together, there are two routes. Several cartridges in one immediate container are discrete units; several individually packaged cartridges inside one outer box form a co-pack. In a co-pack each inner container must meet the immediate-container rules, the products must be consistent, and the outer label must show the number of containers and either each lot number or a traceable master lot number. The outermost container does not need to be child resistant, but its total must stay within the 30 g dried-cannabis equivalency limit.
Step 7: Production details buyers forget
- Filling and capping method. Hand-filled programs tolerate more variation; automated capping needs tight tolerances on cartridge and tube.
- Security feature. Decide whether it is a seal, a shrink band or a tamper-evident label, and how it is applied on your line.
- Excise stamp placement. Leave room for the excise stamp; contact the Canada Revenue Agency for stamp requirements on co-packs.
- Case pack. How many units per inner and outer case, and how cases are labelled for the receiving warehouse.
Requesting a quote
Send the cartridge samples or drawings, the immediate container you prefer, the colour, how the label will be applied, quantity per SKU and the target launch date. If you also need filling or pack-out support, mention it and we will plan the packaging around the licensed line. Start on our 510 cart packaging page or explore concentrate packaging for other extract formats.